Recently Finished Pens from Kilk Pen Studio

[KilkPens]

Here are a few of recently finished pens in our pen studio.. I hope you like...


Plunger mechanism up to 1.7ml of ink. AA Resin and German elforyn. 24k plated rings, clip and plunger rod. JoWo #6 Nib unit.

http://i392.photobucket.com/albums/pp3/KilkPens/zb24_zpsn3lhobmt.jpg
http://i392.photobucket.com/albums/pp3/KilkPens/zb23_zpsfufqnrym.jpg
http://i392.photobucket.com/albums/pp3/KilkPens/zb22_zpsk3qucnwf.jpg
http://i392.photobucket.com/albums/pp3/KilkPens/zb25_zpsbkxvrjoo.jpg


French vintage celluloid and SEM Ebonite material.. JoWo #6 nib. Convertor and cartridge available.

http://i392.photobucket.com/albums/pp3/KilkPens/zb21_zpsoxa2rifl.jpg
http://i392.photobucket.com/albums/pp3/KilkPens/zb20_zpsetyrzcdt.jpg
http://i392.photobucket.com/albums/pp3/KilkPens/zb19_zpsboynzl5g.jpg

French vintage celluloid and SEM Ebonite material.. 24k gold plated custom/handmade cap band and clip. JoWo #6 nib. Convertor and cartridge available.

http://i392.photobucket.com/albums/pp3/KilkPens/zb13_zps7pk0qeli.jpg
http://i392.photobucket.com/albums/pp3/KilkPens/zb12_zpsqsstmd45.jpg

Exotic bubinga wood and indian molted ebonite. Brass metal ring and roll stopper. Jowo #6 Nib, eyedropper and cartridge available.
Finish on wood is oil finish for aobut 20 coats in a week, then carnouba wax.

http://i392.photobucket.com/albums/pp3/KilkPens/zb15_zpsv9ism4iv.jpg
http://i392.photobucket.com/albums/pp3/KilkPens/zb14_zpsnz6wm9hu.jpg

[rpsyed]

The wooden pen looks great! The fact that you can make your own plunger-fill mechanisms is just awesome too. Nice work!

[Anne]

Very Impressive - I especially like the first two. I wish you luck with your business.

[Empty_of_Clouds]

Nice. Would I be right in assuming that these are custom ordered models? I ask because nothing like this is listed in your shop.

[da vinci]

Great work. The hand made cap band looks fabulous and as rpsyed said great that you are now making different types of filling systems :)

[KilkPens]

The wooden pen looks great! The fact that you can make your own plunger-fill mechanisms is just awesome too. Nice work!
Thank you :) Plunger works fine to some penlovers.. My favorite is pheumatics ;)


Very Impressive - I especially like the first two. I wish you luck with your business.
Thank you Anne ;)


Nice. Would I be right in assuming that these are custom ordered models? I ask because nothing like this is listed in your shop.
All my pens are custom ordered.. The ones in my shop are the only available ones. I usually work on bespoke pens rather than model lineup.. If you have a pen in your mind, pls contact via info@kilk.ist


Great work. The hand made cap band looks fabulous and as rpsyed said great that you are now making different types of filling systems :)
Thank you.. The band ornament is my Kilk Pen Studio flagship designs.. It is available both with silver and goldplated jeweller bronze ;)

[amk]

I particularly like the idea of putting real wood together with wood grain ebonite. But the standout is the beautiful ivory-and-horn coloured pen you show first. What a glorious combination!

[Empty_of_Clouds]

All my pens are custom ordered.. The ones in my shop are the only available ones. I usually work on bespoke pens rather than model lineup.. If you have a pen in your mind, pls contact via info@kilk.ist

Thanks, but after my disastrous foray into custom pens last year I don't think it would be wise for me to get involved again.

[fountainpenkid]

Wonderful and unique work! Thanks for sharing it!

[KilkPens]

Thnx for kind words ;)

[RNHC]

Wow. I was never interested in wooden pens but your wooden made me stop and take a closer look. That is one nice looking pen.

[AWLogue]

Great looking pens! I have one small piece of (hopefully) constructive criticism.

I find the large, visible lip of the housing to be unattractive and distracting. I use a 9mm bit to create a very small recess in the front of my sections so that the nib units sits flush with the front of the section.

[fountainpenkid]

Great looking pens! I have one small piece of (hopefully) constructive criticism.

I find the large, visible lip of the housing to be unattractive and distracting. I use a 9mm bit to create a very small recess in the front of my sections so that the nib units sits flush with the front of the section.

Some Edison pens have the same problem, but even worse...I wonder why?

[AWLogue]

Great looking pens! I have one small piece of (hopefully) constructive criticism.

I find the large, visible lip of the housing to be unattractive and distracting. I use a 9mm bit to create a very small recess in the front of my sections so that the nib units sits flush with the front of the section.

Some Edison pens have the same problem, but even worse...I wonder why?

I really don't know. It takes about two minutes max, including bit changes.

[KilkPens]

Great looking pens! I have one small piece of (hopefully) constructive criticism.

I find the large, visible lip of the housing to be unattractive and distracting. I use a 9mm bit to create a very small recess in the front of my sections so that the nib units sits flush with the front of the section.

Thank you for this critic :) The lip is consciously left there for both aesthetical and functional issues. Some of my pens are without this lip ;) Thanks for pricese looking ;)