Tony Rex
February 5th, 2014, 09:52 PM
Hi all,
I made a similar holder, inspired by Kokuyo A6 "Worksupport Notebook" ノ-414 http://item.rakuten.co.jp/kokuyo/4901480096421/
http://farm3.staticflickr.com/2858/12335936084_7b00d13bdf_z.jpg
http://farm8.staticflickr.com/7448/12335652363_675ff5bf05_z.jpg
http://farm4.staticflickr.com/3818/12335493955_275b0d7e5f_z.jpg
Materials:
- Elastic strap (wide bra strap is good, pinch the missus' or girlfriend's lol)
- Rigid plastic (I got mine from from recycled packaging)
- Thick cardboard*
General instructions:
- Cut two holes with a sharp chisel. Make four parallel cuts then cut the ends.
- Staple one end of the elastic strap to the plastic backing, measure with the pen, staple both ends, then replace staples (one by one) with figure of eight stitching*.
- To even out the inside of the cover, paste a cardboard with a cutout.
- Cover it with whatever if you want... I left mine open.
- Done.
*optional.
Here, I will let the pictures do the talking.
http://farm8.staticflickr.com/7440/12335663843_6862c0497b_z.jpg
http://farm4.staticflickr.com/3751/12335508565_552b04807e_z.jpg
http://farm4.staticflickr.com/3687/12335965264_38a881f80d_z.jpg
Voila..
http://farm8.staticflickr.com/7403/12335968014_522bf9179c_z.jpg
Kthxbai.. :crazy_pilot:
I made a similar holder, inspired by Kokuyo A6 "Worksupport Notebook" ノ-414 http://item.rakuten.co.jp/kokuyo/4901480096421/
http://farm3.staticflickr.com/2858/12335936084_7b00d13bdf_z.jpg
http://farm8.staticflickr.com/7448/12335652363_675ff5bf05_z.jpg
http://farm4.staticflickr.com/3818/12335493955_275b0d7e5f_z.jpg
Materials:
- Elastic strap (wide bra strap is good, pinch the missus' or girlfriend's lol)
- Rigid plastic (I got mine from from recycled packaging)
- Thick cardboard*
General instructions:
- Cut two holes with a sharp chisel. Make four parallel cuts then cut the ends.
- Staple one end of the elastic strap to the plastic backing, measure with the pen, staple both ends, then replace staples (one by one) with figure of eight stitching*.
- To even out the inside of the cover, paste a cardboard with a cutout.
- Cover it with whatever if you want... I left mine open.
- Done.
*optional.
Here, I will let the pictures do the talking.
http://farm8.staticflickr.com/7440/12335663843_6862c0497b_z.jpg
http://farm4.staticflickr.com/3751/12335508565_552b04807e_z.jpg
http://farm4.staticflickr.com/3687/12335965264_38a881f80d_z.jpg
Voila..
http://farm8.staticflickr.com/7403/12335968014_522bf9179c_z.jpg
Kthxbai.. :crazy_pilot: