Ruby Red Bulb Filler

[Brooks803]

I really enjoy making and using these bulb fillers! Here's my 2nd one all finished up. The material is of my own design, cast in Alumilite resin. I learned a lot from making my first one and made some much needed design changes to this one. The most note worthy is where the sac is attached. This time I turned the tenon from the same piece of material. I also had a much easier time modifying the feed to accept the breather tube this time. I didn't ruin any this go around! For those that like the specs here ya go:

Dimensions:

Overall Length: 6 1/8"
Cap: 2 1/2"
Body + Nib: 5 7/8"

Threads:

Cap/Body: 14x.75mm Single Start
Body/Section: 10x1mm
Blind Cap: 12x1mm

Nib & Ink:

#6 Jowo Polished Steel - F

Bulb Filler

http://i1136.photobucket.com/albums/n496/Brooks803/DSC04719561x700_zpsb544a8a3.jpg (http://s1136.photobucket.com/user/Brooks803/media/DSC04719561x700_zpsb544a8a3.jpg.html)

http://i1136.photobucket.com/albums/n496/Brooks803/DSC04721516x700_zpsc9a76f2b.jpg (http://s1136.photobucket.com/user/Brooks803/media/DSC04721516x700_zpsc9a76f2b.jpg.html)

http://i1136.photobucket.com/albums/n496/Brooks803/DSC04723700x333_zps3a459611.jpg (http://s1136.photobucket.com/user/Brooks803/media/DSC04723700x333_zps3a459611.jpg.html)

http://i1136.photobucket.com/albums/n496/Brooks803/DSC04724700x415_zps3b3ae6c3.jpg (http://s1136.photobucket.com/user/Brooks803/media/DSC04724700x415_zps3b3ae6c3.jpg.html)

http://i1136.photobucket.com/albums/n496/Brooks803/DSC04726679x700_zpsf62eb262.jpg (http://s1136.photobucket.com/user/Brooks803/media/DSC04726679x700_zpsf62eb262.jpg.html)


Thanks for looking!

[RuiFromUK]

That is a very beautiful pen which makes me envious. Those colours are out of this world.