4 Attachment(s)
Parker 51 Vac with unusual (To Me) Cap
Hi all
I have just picked up a rather battered Parker 51 Vacumatic with a rather unusual (To Me) cap
Anyone know anything about this cap
The pen was made in Canada, was this something the Canadian factory produced as standard or was it for a special occasion?
Thanks for any help with this
Paul
Re: Parker 51 Vac with unusual (To Me) Cap
As far as I know is this type of cap called "stacked coins" or “Jeweler’s Band”
The clip seems to be a replacement (the ding is probably from the original clip).
But Ernesto Soler does show them all: www.parker51.com
C.
Re: Parker 51 Vac with unusual (To Me) Cap
Hello,
I am sure you have looked on the Parker 51.com before you asked this question.
Personally I think the clip is original.
Ernesto Soler thinks the cap is common, it is not common in the UK, I have never seen one.
Re: Parker 51 Vac with unusual (To Me) Cap
I had a look on Parker51.com at the ones listed as Jewlers band/stacked coins, mine does look a bit like the ones shown except the pattern on the band on mine seem more pronounced, although that might be down to the low resolution images on that website.
Will have a go at Getting the dent out over the next couple of days and will post another picture once it's cleaned up, can they just be polished or did they use some sort of fragile plating.
Thanks
1 Attachment(s)
Re: Parker 51 Vac with unusual (To Me) Cap
Your cap is not the same.
It is an unrecorded 51 cap.
The space between the pattern end and the cap end is less distant.
Have added a net lift of what we are speaking about.
Your cap is NOT plated, it will polish - you can completely clean it up. ( but NOT the clip - it is gold fill, or once was - very worn now )
If I were to own it, I would leave it as it is.
christof, has a very good eye - the indentation is from the clip end
Re: Parker 51 Vac with unusual (To Me) Cap
Paul,
A further thought I had today.
You do realise that it possible to realign the clip to ' cover ' the indentation on the cap.
If this splendid pen were mine I would adjust the clip, lightly polish the cap and service the pen ( possibly polish it )
Then you would be holding something very special.
Re: Parker 51 Vac with unusual (To Me) Cap
Yep
I stripped the cap today, and managed to get 99% of the dent out and it polished up to a nice shine, there are a couple of scratches I can't do anything with but it now looks miles better, will post some pics once I have cleaned the rest up and fitted the new diaphragm.
Paul
3 Attachment(s)
Re: Parker 51 Vac with unusual (To Me) Cap
Finished rebuilding this pen, new diaphragm fitted and all cleaned and polished, I got most of the dent out and there are some scratches to the cap I could do nothing with, but what a difference now its polished up and shiny.Attachment 47406Attachment 47407Attachment 47408
Re: Parker 51 Vac with unusual (To Me) Cap
Paul,
Outstanding.
What a wonderful looking pen it is now.
A perfect restoration of a special pen.