Printable View
I am trying to verify something. What size diaphragm do I use on a Parker striped Duovac in the regular 5 and a quarter inch size with a plastic plunger. Is it the debutante size or standard size? https://uploads.tapatalk-cdn.com/201...e01428ebaa.jpg
Sent from my SM-G955U using Tapatalk
I think it is standard, but... I have an identical pen that I'm taking with me to the LA show this weekend and will ask to confirm which size. If you haven't heard by then I'll have a solid answer from one of the smart ones.
Thanks, I got impatient and tried a debutante size.
Now I am dealing with another issue. The cap had some foil on the inside of it, not learning my lesson yet to leave well enough alone, I took it off. The cap screws on tight with the section and nib out, but when I put them in, the cap will not tighten down at all.
So I put some more aluminum foil in and it works well enough. I wonder if it is the section causing this because it is too long? Could the nib be too long? Any ideas? The bottom of the section looks different than what I am used to. https://uploads.tapatalk-cdn.com/201...ed2a76c413.jpghttps://uploads.tapatalk-cdn.com/201...f06712a894.jpghttps://uploads.tapatalk-cdn.com/201...9eadf32881.jpghttps://uploads.tapatalk-cdn.com/201...f132f8832b.jpghttps://uploads.tapatalk-cdn.com/201...5a41c11410.jpg
Sent from my SM-G955U using Tapatalk
I just took a look at mine, which appears to be an identical pen (different color, but...). I think that stuff you pulled out was someone's crude method of dealing with loose threads that had either worn or the barrel shrunk. The only thing inside my cap is the inner cap that meets up with the rim of the section. Your section looks the same as mine and the nib appears to be set to the appropriate depth. If you ever remove a nib and feed, it is important to check the depth of the cap so you don't screw on the cap, find you didn't push the nib/feed in far enough, and end up mashing the tips of the tines.
Some other guy had the same question. I answered there as well. Deb sized diaphragm.
Your pen is a vacumatic filled Duofold.
Thanks, I figured this out, I was just second guessing myself. Farmboy, any ideas on the issue with the cap? What strikes me as odd is that it will tighten on fine without the nib and section in place, but not when they are in.Quote:
Originally Posted by Farmboy
I'm not FB but I would suspect that the cap threads are either worn or the cap has expanded (or barrel shrunk, though it didn't appear so). It can screw on because without the nib/section it can go farther down over the barrel and the threads reach up into a narrower diameter or threads that haven't worn. When you put the section in place it bottoms out against the inner cap (as it should) but the threads aren't gripping due to the above reasons. As I stated before, the previous owner dealt with it by 'shimming' the inner threads with aluminum foil, a dodgy if effective solultion.Quote:
Originally Posted by Linkinyeah
Okay, that makes sense. I thought about sending it to a repair man, but I wasn't sure if there were some other home remedies I could try first. Also, if it has expanded, or if the barrel shrank, is there anything that can even be done without just swapping out parts?Quote:
Originally Posted by Jon SzantoI'm not FB but I would suspect that the cap threads are either worn or the cap has expanded (or barrel shrunk, though it didn't appear so). It can screw on because without the nib/section it can go farther down over the barrel and the threads reach up into a narrower diameter or threads that haven't worn. When you put the section in place it bottoms out against the inner cap (as it should) but the threads aren't gripping due to the above reasons. As I stated before, the previous owner dealt with it by 'shimming' the inner threads with aluminum foil, a dodgy if effective solultion.Quote:
Originally Posted by Linkinyeah
Most common repair process involves stretching the barrel to make it engage in the cap threads. Other possibilities include shaving the inner cap to allow more engagement or installing a sleeve in the cap and recutting the threads.Quote:
Originally Posted by LinkinyeahOkay, that makes sense. I thought about sending it to a repair man, but I wasn't sure if there were some other home remedies I could try first. Also, if it has expanded, or if the barrel shrank, is there anything that can even be done without just swapping out parts?Quote:
Originally Posted by Jon SzantoI'm not FB but I would suspect that the cap threads are either worn or the cap has expanded (or barrel shrunk, though it didn't appear so). It can screw on because without the nib/section it can go farther down over the barrel and the threads reach up into a narrower diameter or threads that haven't worn. When you put the section in place it bottoms out against the inner cap (as it should) but the threads aren't gripping due to the above reasons. As I stated before, the previous owner dealt with it by 'shimming' the inner threads with aluminum foil, a dodgy if effective solultion.Quote:
Originally Posted by Linkinyeah
Yeah, I read this on a fountain pen network post after doing more research. Here is the link if anyone would like to read it : http://www.fountainpennetwork.com/fo...ead-onto-body/
Sent from my SM-G955U using Tapatalk