Results 1 to 6 of 6

Thread: Identify color on Eversharp Skyline

  1. #1
    Senior Member Linkinyeah's Avatar
    Join Date
    Aug 2016
    Posts
    598
    Thanks
    120
    Thanked 65 Times in 43 Posts
    Rep Power
    8

    Default Identify color on Eversharp Skyline

    Can't convince myself of the color of this pen. Is it a non-faded army brown or dubbonet red?

    I am searching for a replacement barrel, but wanted to be sure on the color.

    If anyone has a extra one I will make it worth your while. Thanks

    Sent from my SM-G955U using Tapatalk

  2. #2
    Senior Member Sagebrush64's Avatar
    Join Date
    May 2015
    Location
    Puget Sound area
    Posts
    355
    Thanks
    47
    Thanked 60 Times in 37 Posts
    Rep Power
    9

    Default Re: Identify color on Eversharp Skyline

    The broken threads are from the body and should give you a hint....it looks brown to me.

  3. The Following User Says Thank You to Sagebrush64 For This Useful Post:

    Linkinyeah (January 16th, 2018)

  4. #3
    Senior Member Linkinyeah's Avatar
    Join Date
    Aug 2016
    Posts
    598
    Thanks
    120
    Thanked 65 Times in 43 Posts
    Rep Power
    8

    Default Re: Identify color on Eversharp Skyline

    Okay, the pictures I have seen of army brown have been much darker.

    Sent from my SM-G955U using Tapatalk

  5. #4
    Senior Member Sagebrush64's Avatar
    Join Date
    May 2015
    Location
    Puget Sound area
    Posts
    355
    Thanks
    47
    Thanked 60 Times in 37 Posts
    Rep Power
    9

    Default Re: Identify color on Eversharp Skyline

    Depending on the lighting, etc. colors will look different. I also believe the color of the dome on the cap corresponds with the barrel color as well....I'm only aware of Army Brown, but I don't claim to know everything about Eversharp Skylines. I"m sure there are many other folks out there who know more.
    In any case, that's a real nice clean looking cap ya got there.
    Good luck with your hunt!

  6. The Following User Says Thank You to Sagebrush64 For This Useful Post:

    Linkinyeah (January 17th, 2018)

  7. #5
    Senior Member Linkinyeah's Avatar
    Join Date
    Aug 2016
    Posts
    598
    Thanks
    120
    Thanked 65 Times in 43 Posts
    Rep Power
    8

    Default Re: Identify color on Eversharp Skyline

    Quote Originally Posted by Sagebrush64 View Post
    Depending on the lighting, etc. colors will look different. I also believe the color of the dome on the cap corresponds with the barrel color as well....I'm only aware of Army Brown, but I don't claim to know everything about Eversharp Skylines. I"m sure there are many other folks out there who know more.
    In any case, that's a real nice clean looking cap ya got there.
    Good luck with your hunt!
    Yeah the whole pen looked that way, almost like it had never been used, even had a sac in it. I got it from an elderly woman who said it was here uncle's. I never could get the nib to write even after knocking the nib and feed out and back in. It wouldn't even work for a dip test. Breather tube and feed were cleaned and while putting the section back in, with just a small amount of pressure the barrel snapped. It makes me sick because like I said, everything looks brand new on it.

    Sent from my SM-G955U using Tapatalk

  8. #6
    Junior Member
    Join Date
    Sep 2019
    Location
    Southern Arizona
    Posts
    7
    Thanks
    0
    Thanked 6 Times in 4 Posts
    Rep Power
    0

    Default Re: Identify color on Eversharp Skyline

    A pen which will not write when dipped, is typically one of two things...… The channel/groove between the tines is clogged with dried ink, floss it to eliminate the dried ink (after soaking it in ammonia water for an hour or two)…
    or,
    The Gap between the feed and the nib is too far... do a paper tests between the nib and the feed and see if the gap is too large to support wicking the ink.

    And unlikely third possibility is a "baby's bottom" at the tip. I say unlikely because the Skyline nibs were known for being inspected and tested at the factory. This does not rule out some well meaning person attempting to polish the nib and ruining the profile on the bottom of the nib.

    As for color, I find most cameras get a truer rendition of the color when dark colored bodies (dark brown, dark blue, dark green, dark grey) are photographed against a flat black background. The automatic color balance feature in most modern cameras can be a real pain.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •