Results 1 to 6 of 6

Thread: Vintage flex with a Waterman Laureat

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member carlos.q's Avatar
    Join Date
    Apr 2013
    Location
    On a hill in Puerto Rico
    Posts
    1,720
    Thanks
    2,241
    Thanked 1,870 Times in 811 Posts
    Rep Power
    13

    Default Vintage flex with a Waterman Laureat

    A few months ago I read a post by someone (I believe it was by FPG member pajaro) who had fitted a vintage Waterman #2 nib on a Laureat pen. Having one of these little pens I set out to find a suitable vintage nib and finally got a 14k nib described as fine with moderate flex. Removing the Laureat's original nib and feed was simple enough (it just pulls out) and replacing it with the vintage nib was fairly simple. The result is a Waterman Laureat with a vintage flex nib:

    Waterman2.jpg

    The only drawback is that the simple Laureat plastic feeder cannot keep up with continuous flexing of the nib. However, for normal expressive writing this setup is great!

    Waterman2b.jpg

  2. The Following 4 Users Say Thank You to carlos.q For This Useful Post:

    amk (April 28th, 2019), Cyril (April 10th, 2020), da vinci (September 29th, 2021), Lady Onogaro (April 28th, 2019)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •