Results 1 to 10 of 10

Thread: Ultrasonic cleaners

  1. #1
    Senior Member fqgouvea's Avatar
    Join Date
    Apr 2015
    Location
    Waterville, ME
    Posts
    377
    Thanks
    113
    Thanked 224 Times in 122 Posts
    Rep Power
    6

    Default Ultrasonic cleaners

    I think Iím at the point where I could use an ultrasonic cleaner, especially with older pens that have lots of old ink left behind. Any recommendations?

    Thanks!

  2. #2
    FPG Donor ♕ Chrissy's Avatar
    Join Date
    Dec 2013
    Location
    United Kingdom
    Posts
    6,840
    Thanks
    3,439
    Thanked 5,920 Times in 2,386 Posts
    Rep Power
    15

    Default Re: Ultrasonic cleaners

    I'm probably going to be the only member on here who offers the following advice.

    I'm in the UK so what is available to me may be different to what is available to you. However, my preference was to buy a USC from a web-site that sells USC's to professionals such as dentists and jewellers among others.

    Yes it is more expensive than the many USC's that can be found on Amazon or ebay. However, it's metal inside and out, is very robust, has a timer that goes for up to 15 minutes and gets the liquid inside nicely warm, and it does a good job every time I use it even if it's multiple times per day.

    Once, a fuse blew and I was able to easily remove the base and replace it.

    If anything else goes wrong with it, I can send it back to the manufacturer who will offer me a new model replacement at a reduced price if he can't fix it.

    I paid what some will consider an astronomical price of almost £100 for it. In the world of USC's, I'm in the group of users who would say you get what you pay for.

    Others have much cheaper USC's that have gone on for years and years and cost very little. The electric wiring should not be part of the lid, as opening and closing of the lid may affect that. My lid is completely removable and all of the electric and works are in the base.
    Regards, Chrissy | My Blog: inkyfountainpens

  3. The Following User Says Thank You to Chrissy For This Useful Post:

    Ahriman4891 (September 13th, 2019)

  4. #3
    Senior Member Deb's Avatar
    Join Date
    Apr 2013
    Location
    Highlands of Scotland
    Posts
    1,658
    Thanks
    1,014
    Thanked 1,617 Times in 771 Posts
    Rep Power
    9

    Default Re: Ultrasonic cleaners

    I have a James Ultra 7000. It was quite expensive - around £75.00 five years ago - but it does a decent job. I find I use it much less than I imagined I would. For cleaning, cotton buds and brushes do a better job than any ultrasonic cleaner. It's good for using with a deoxidizer to remove corrosion and rust but I don't get many pens in that state.
    Regards,
    Deb
    My Blog
    My Pen Sales

  5. #4
    FPG Donor ♕ KrazyIvan's Avatar
    Join Date
    Feb 2012
    Location
    Texas-USA
    Posts
    4,937
    Thanks
    1,397
    Thanked 1,715 Times in 895 Posts
    Rep Power
    15

    Default Re: Ultrasonic cleaners

    Just be careful with older pens that may have plating damage. If at all possible, remove metal parts. Any plating damage will be made worse bu an UC.
    Fountain Pen Sith Lord | Daakusaido | inktronics blog | Twitter | Instagram

  6. The Following User Says Thank You to KrazyIvan For This Useful Post:

    FredRydr (September 12th, 2019)

  7. #5
    Senior Member carlos.q's Avatar
    Join Date
    Apr 2013
    Location
    On a hill in Puerto Rico
    Posts
    1,342
    Thanks
    1,391
    Thanked 1,197 Times in 549 Posts
    Rep Power
    9

    Default Re: Ultrasonic cleaners

    I bought a Trent CD-7810 for $29.95 from Amazon about seven years ago and it's still going strong.

    And yes it will remove the gold plating from a nib. Don't ask how I know.

  8. #6
    Senior Member calamus's Avatar
    Join Date
    May 2018
    Location
    Redwoods Rainforest
    Posts
    863
    Thanks
    744
    Thanked 745 Times in 359 Posts
    Rep Power
    3

    Default Re: Ultrasonic cleaners

    Quote Originally Posted by carlos.q View Post
    I bought a Trent CD-7810 for $29.95 from Amazon about seven years ago and it's still going strong.

    And yes it will remove the gold plating from a nib. Don't ask how I know.
    Quid rides? Mutato nomine de te fabula narratur. ó Horace
    (What are you laughing at? Just change the name and the jokeís on you.)

  9. #7
    Senior Member azkid's Avatar
    Join Date
    Mar 2018
    Location
    Colorado, USA
    Posts
    1,932
    Thanks
    3,483
    Thanked 1,527 Times in 760 Posts
    Rep Power
    4

    Default Re: Ultrasonic cleaners

    Mines a cheapo no name that is labeled in Chinese. I had to reglue the metal pan in using RTV silicone sealant. It is noisy. But I've used it for pens, watch parts, and PCBs and it keeps going and hasn't burned the house down.. Yet. If it breaks I will either have to fix it myself or toss it.

    I think I was looking at watchmaker USC machines awhile ago... And I think they were significantly more than $100 or £100.

  10. #8
    FPG Donor ♕ Chrissy's Avatar
    Join Date
    Dec 2013
    Location
    United Kingdom
    Posts
    6,840
    Thanks
    3,439
    Thanked 5,920 Times in 2,386 Posts
    Rep Power
    15

    Default Re: Ultrasonic cleaners

    Quote Originally Posted by azkid View Post
    Mines a cheapo no name that is labeled in Chinese. I had to reglue the metal pan in using RTV silicone sealant. It is noisy. But I've used it for pens, watch parts, and PCBs and it keeps going and hasn't burned the house down.. Yet. If it breaks I will either have to fix it myself or toss it.

    I think I was looking at watchmaker USC machines awhile ago... And I think they were significantly more than $100 or £100.
    I have an Ultrawave one that I fixed myself. It's very old and came from the same company that I bought my new one from. I had started to notice small pieces of something underneath it and when I removed the screws in the base, there was a stone-like block of material that had two electrical connectors attached to it. The stone-like material had cracked and crumbled slightly and one of the connectors had dropped off.
    So I used some Milliput to repair the crack and crumbling part, re-attached the electrical connector, and left it to set for a few days. After that it worked perfectly again. The manufacturer asked if I wanted a job.
    I wasn't sure how long I could trust it for, so when they gave me a great deal on a new one I splurged and bought it.
    My version is the smallest in their range.
    Regards, Chrissy | My Blog: inkyfountainpens

  11. #9
    Senior Member Deb's Avatar
    Join Date
    Apr 2013
    Location
    Highlands of Scotland
    Posts
    1,658
    Thanks
    1,014
    Thanked 1,617 Times in 771 Posts
    Rep Power
    9

    Default Re: Ultrasonic cleaners

    Quote Originally Posted by Chrissy View Post
    Quote Originally Posted by azkid View Post
    Mines a cheapo no name that is labeled in Chinese. I had to reglue the metal pan in using RTV silicone sealant. It is noisy. But I've used it for pens, watch parts, and PCBs and it keeps going and hasn't burned the house down.. Yet. If it breaks I will either have to fix it myself or toss it.

    I think I was looking at watchmaker USC machines awhile ago... And I think they were significantly more than $100 or £100.
    I have an Ultrawave one that I fixed myself. It's very old and came from the same company that I bought my new one from. I had started to notice small pieces of something underneath it and when I removed the screws in the base, there was a stone-like block of material that had two electrical connectors attached to it. The stone-like material had cracked and crumbled slightly and one of the connectors had dropped off.
    So I used some Milliput to repair the crack and crumbling part, re-attached the electrical connector, and left it to set for a few days. After that it worked perfectly again. The manufacturer asked if I wanted a job.
    I wasn't sure how long I could trust it for, so when they gave me a great deal on a new one I splurged and bought it.
    My version is the smallest in their range.
    You should be on The Repair Shop.
    Regards,
    Deb
    My Blog
    My Pen Sales

  12. #10
    FPG Donor ♕ Chrissy's Avatar
    Join Date
    Dec 2013
    Location
    United Kingdom
    Posts
    6,840
    Thanks
    3,439
    Thanked 5,920 Times in 2,386 Posts
    Rep Power
    15

    Default Re: Ultrasonic cleaners

    Quote Originally Posted by Deb View Post
    Quote Originally Posted by Chrissy View Post
    Quote Originally Posted by azkid View Post
    Mines a cheapo no name that is labeled in Chinese. I had to reglue the metal pan in using RTV silicone sealant. It is noisy. But I've used it for pens, watch parts, and PCBs and it keeps going and hasn't burned the house down.. Yet. If it breaks I will either have to fix it myself or toss it.

    I think I was looking at watchmaker USC machines awhile ago... And I think they were significantly more than $100 or £100.
    I have an Ultrawave one that I fixed myself. It's very old and came from the same company that I bought my new one from. I had started to notice small pieces of something underneath it and when I removed the screws in the base, there was a stone-like block of material that had two electrical connectors attached to it. The stone-like material had cracked and crumbled slightly and one of the connectors had dropped off.
    So I used some Milliput to repair the crack and crumbling part, re-attached the electrical connector, and left it to set for a few days. After that it worked perfectly again. The manufacturer asked if I wanted a job.
    I wasn't sure how long I could trust it for, so when they gave me a great deal on a new one I splurged and bought it.
    My version is the smallest in their range.
    You should be on The Repair Shop.
    ROFL. My favourite TV show of all time.
    Regards, Chrissy | My Blog: inkyfountainpens

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •