Results 1 to 2 of 2

Thread: Japanese ED packing seal repair?

  1. #1
    Member awa54's Avatar
    Join Date
    Jul 2019
    Location
    Vermont, USA
    Posts
    85
    Thanks
    21
    Thanked 25 Times in 18 Posts
    Rep Power
    1

    Default Japanese ED packing seal repair?

    As you might have seen, I recently picked up a pair of vintage Japanese eyedropper fill pens. Both feature an ink shutoff system that uses a blind cap and a shaft that runs through the barrel/ink chamber. At first, both seemed to have an adequate seal for daily use (after I removed all of the solidified grease from the shafts and replaced it with tacky silicone dive grease), but after a couple of days inked, they have both leaked ink into the blind cap... the larger pen looks like the shaft is threaded into the blind cap on reverse threads, but they won't budge with safe amounts of force. The smaller one isn't giving up any secrets

    I have seen (and own at least one) Japanese pens of this type, that have a threaded retaining ring, beneath which a cork seal acts as a packing unit for the shaft, however those pens were likely older pre-war models and both of my "new" pens seem to use some sort of different method, as the seals appear to be under permanently attached parts of the pen. If any of you have suggestions as to the assembly of these seal units, or know of any pen repair businesses that have experience with vintage Japanese pens, that information would be greatly appreciated!

    Some people cut off the shaft on this type of pen, then permanently seal off the bottom of the barrel so that the pen can at least be used as a conventional ED filler, but I'd rather not do that If it can be avoided.
    David-

    So many restoration projects...

  2. #2
    FPG Donor ♕ KrazyIvan's Avatar
    Join Date
    Feb 2012
    Location
    Texas-USA
    Posts
    4,880
    Thanks
    1,377
    Thanked 1,676 Times in 872 Posts
    Rep Power
    14

    Default Re: Japanese ED packing seal repair?

    I have a similar style Japanese ED pen and after some research and talking to someone with a few restores of that style of pen, they told me the best bet is to cut the rod off and seal the hole with an ebonite plug. He has done them before and trying to remove the rod/seal assembly ends up breaking the pen, more often than not. I thought I would try and use some epoxy to plug the hole but have not attempted it as of yet. The other option is to use crazy glue and baking soda mixture to plug the hole. Again, something I have been debating and I have not been brave enough to attempt.
    Fountain Pen Sith Lord | Daakusaido | inktronics blog | Twitter | Instagram

  3. The Following User Says Thank You to KrazyIvan For This Useful Post:

    awa54 (September 15th, 2019)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •