The Kaweco piston fillers have caught my eye. What is the difficulty level of disassembly for greasing the piston on one of these? Does the section unscrew? Is a tool required?
Thank you in advance!
The Kaweco piston fillers have caught my eye. What is the difficulty level of disassembly for greasing the piston on one of these? Does the section unscrew? Is a tool required?
Thank you in advance!
The piston is fairly easy to disassemble. I use a TWSBI wrench with one end filed about 1.5mm wider. (I'm talking about V16s and V16Ns; I don't know anything about earlier models).
The sections can sometimes be very hard to pull apart but they won't require special tools. The exposed part of the feed has notches in it that you can pull with you finger nails. They will usually come out easily -- however, I ruined a fantastic, gold F nib once when I resorted to pliers in one that seemed stuck. Lesson learned: if it won't budge by pulling with your nails, disassemble the piston and knock the feed out from behind.
@chiaroscuro
Does the feed pull out for the V11/12 type pens?
If you can get a blanking plate from a computer case, the serial/parallel cable cut out fits the pen as well.
Last edited by whych; June 10th, 2013 at 08:39 AM.
Thanks for that.
I tried pushing the nib and feed out after removing the piston and it worked on the V11.
Soaking the pen before pushing the feed out makes it easier.
For those wanting to do it, I used a piece of wooden dowel around 3 to 4 mm thick.
Bookmarks