Results 1 to 11 of 11

Thread: Modern Kaweco DIA2

  1. #1
    Senior Member Ray-VIgo's Avatar
    Join Date
    May 2013
    Posts
    353
    Thanks
    97
    Thanked 209 Times in 113 Posts
    Rep Power
    8

    Default Modern Kaweco DIA2

    Just a quick note - the gold trim variation of the Kaweco DIA2 has been on "blow out" pricing on Amazon and eBay for a couple of weeks now (mine was about half price of usual). If you buy one, be sure to order a converter separately, and if you are in doubt as to nib width, go up a size. The medium nib on mine is a nice, smooth fine/medium. The fine would have been too fine for me. It runs a little narrower than an equally marked Pelikan nib, from what I can see (I use a "fine" in the M200 and M400 series). My Kaweco DIA2 came with a nice little case, one cartridge of ink, and the usual little paperwork. It did not come with the converter (which just arrived now as well). The nib has a ball tip, and it's a firm, smooth writer. The base material of the section is metal, so it has a little heft, but it's not uncomfortable to write with. I think it's a decent buy at $70 or so, though I think $130 is steep for it. If you're up in that range, I'd look at the Pelikan M200 and related series.

  2. The Following 3 Users Say Thank You to Ray-VIgo For This Useful Post:

    Kaputnik (January 7th, 2021), Malcolm (January 14th, 2021), TFarnon (December 31st, 2020)

  3. #2
    Senior Member Ray-VIgo's Avatar
    Join Date
    May 2013
    Posts
    353
    Thanks
    97
    Thanked 209 Times in 113 Posts
    Rep Power
    8

    Default Re: Modern Kaweco DIA2

    I have been using this pen for a few more days. The nib was excellent straight from the box - good flow and smooth writing. It's more rigid than a Pelikan M200 nib, but equally as smooth. I usually find I have to do some minor adjusting to new nibs, but this one was great straight from the box, like my M200 and M400 Pelikans.

    The pen has a little different feel from the M200. It's heavier and slightly longer than the M200. There is more section in the Dia2 than in the M200 - the section is longer and is where most of the weight is; whereas in the M200, the section is smaller and more balanced with the rest of the pen.

    The nib is considerably smaller than the M200 and the Dia2 writes a little finer than the Pelikan.

    The M200 holds more ink, but the Dia2 can take a cartridge if you prefer a cartridge. Both the M200 and the Dia2 have a modern "ball" tip to the nib. The Dia2 is a good pen for someone who like a little heavier pen, with the weight being in the section down low as you hold the pen. It's also nice if you like a roomier section for gripping and don't mind a smaller nib.

    The Dia2 is a nice pen, especially at the discount of $70. I still think the $100-120 level is steep for a cartridge/converter item. The M200 is a more unitary design and construction. The M200 is more "balanced", while the Dia2 is section-heavy. The quality of workmanship on both is quite good, with the M200 being a little better. The knurled derby on the Dia2 is a really nice addition, as are the medallions on the derby top and at the butt end of the barrel.

    The Dia2's barrel-to-section threads are brass-on-brass, which adds some heft and sturdiness. The jewel with medallion at the butt end of the barrel does add a little weight to somewhat balance the heavy brass section. It's certainly not a flimsy or "cheap" feeling pen.

    The clip is study and attractive. The cap bands are somewhat on the large side in that they tend to stand proud from the surface of the cap, more so than a Pelikan or the Waterman Phileas.

    Comparing to other modern but traditionalist-type pens I have:
    -the Dia2 is a step up from the Conklin Glider and Conklin Mark Twain. The Conklins aren't bad pens, but the nibs needed substantial adjustment out of the box. I've found their nibs often are over-polished to the point the slit does not always contact the paper.

    -the Dia2 is roughly in the same grouping as a Pelikan M200, with the M200 being a little better design and quality all-around. Both are well-made. The Dia2 offers cartridge/converter.

    -the Dia2 reminds me in some ways of the Waterman Phileas, with the Dia2 being overall a little nicer pen.

    I'm happy with my buy on discount, but I'd be hard-pressed to pass up the M200 in favor of the Dia2 at $120+.

  4. The Following 5 Users Say Thank You to Ray-VIgo For This Useful Post:

    Ahriman4891 (January 15th, 2021), carlos.q (January 7th, 2021), ceebert (February 12th, 2021), FredRydr (January 7th, 2021), pocketses (January 20th, 2021)

  5. #3
    Senior Member FredRydr's Avatar
    Join Date
    Sep 2012
    Location
    Carlisle, Pennsylvania USA
    Posts
    3,553
    Thanks
    871
    Thanked 3,978 Times in 1,726 Posts
    Rep Power
    13

    Default Re: Modern Kaweco DIA2

    Quote Originally Posted by Ray-VIgo View Post
    ...I'd be hard-pressed to pass up the M200 ....
    I find they are one of the best modern pens for the money out there.

  6. The Following User Says Thank You to FredRydr For This Useful Post:

    Ray-VIgo (January 7th, 2021)

  7. #4
    Senior Member dneal's Avatar
    Join Date
    Mar 2014
    Posts
    1,133
    Thanks
    535
    Thanked 736 Times in 368 Posts
    Rep Power
    8

    Default Re: Modern Kaweco DIA2

    So I picked up one of the $69 Diaís from Amazon. I have looked at them for years (particularly the amber LE), but was always worried the material quality would be lacking. The little Bock 060 seems undersized as well, but I get using it from a part commonality perspective.

    Anyway, youíre right and itís a very nice pen. The heft in particular feels good. The one I received writes well and needed no tuning. $70 was a steal.

    Thanks for the heads up.

  8. The Following User Says Thank You to dneal For This Useful Post:

    Ray-VIgo (January 13th, 2021)

  9. #5
    Senior Member Ron Z's Avatar
    Join Date
    Nov 2019
    Location
    Western Pennsylvania
    Posts
    254
    Thanks
    0
    Thanked 521 Times in 184 Posts
    Rep Power
    2

    Default Re: Modern Kaweco DIA2

    There is a thread on the "other" board about using the Bock 070, which fits perfectly in place of the one supplied in the pen. I bought one, and it makes a big difference in the appearance of the pen.

    Visit Main Street Pens
    A full service pen shop providing professional, thoughtful pen repair....

  10. The Following 3 Users Say Thank You to Ron Z For This Useful Post:

    Ahriman4891 (January 15th, 2021), jodylud (January 14th, 2021), Ray-VIgo (January 13th, 2021)

  11. #6
    Senior Member dneal's Avatar
    Join Date
    Mar 2014
    Posts
    1,133
    Thanks
    535
    Thanked 736 Times in 368 Posts
    Rep Power
    8

    Default Re: Modern Kaweco DIA2

    I assume that's a typo and you mean 076, but I have a spare 18k tri-tone and it does indeed fit perfectly! I assumed that the shoulders would be too wide or the extra 3 1/2mm length would be too much for the inner cap, which has been the case whenever I try to substitute one where a 060 or 180 was.

    Much more appropriately sized to the pen. Thanks!
    Last edited by dneal; January 13th, 2021 at 08:20 AM.

  12. #7
    Senior Member Ray-VIgo's Avatar
    Join Date
    May 2013
    Posts
    353
    Thanks
    97
    Thanked 209 Times in 113 Posts
    Rep Power
    8

    Default Re: Modern Kaweco DIA2

    Quote Originally Posted by Ron Z View Post
    There is a thread on the "other" board about using the Bock 070, which fits perfectly in place of the one supplied in the pen. I bought one, and it makes a big difference in the appearance of the pen.
    Interesting. I like the look of the bi-color steel nib. Is there anywhere in the US selling the 076 units? I found a source in Britain but I'd be paying as much for shipping as I would for the nib unit. I searched but couldn't find a US source.

  13. #8
    Senior Member dneal's Avatar
    Join Date
    Mar 2014
    Posts
    1,133
    Thanks
    535
    Thanked 736 Times in 368 Posts
    Rep Power
    8

    Default Re: Modern Kaweco DIA2

    I bought a few when I was living in Germany 5 years ago or so, with a distributor located near me in Wiesbaden; but I never found them for sale here in the States.

    Anyway, here's a quick snapshot to give you an idea of the dimensions.

    1.jpeg

  14. The Following User Says Thank You to dneal For This Useful Post:

    jodylud (January 14th, 2021)

  15. #9
    Senior Member Ray-VIgo's Avatar
    Join Date
    May 2013
    Posts
    353
    Thanks
    97
    Thanked 209 Times in 113 Posts
    Rep Power
    8

    Default Re: Modern Kaweco DIA2

    I like that. I'm surprised it fits, but great if it does. Do the nib shoulders draw ink if there's condensation in the cap? On pens where the nib shoulders just barely touch the inner cap, you can sometimes get ink accumulation on the nib if you have condensation.

  16. #10
    Senior Member dneal's Avatar
    Join Date
    Mar 2014
    Posts
    1,133
    Thanks
    535
    Thanked 736 Times in 368 Posts
    Rep Power
    8

    Default Re: Modern Kaweco DIA2

    I can't feel any contact on the shoulders or tip (which is usually the problem with this sort of thing).

    Wintertime condensation is always an issue when going from outdoors to in, and in this case it might be exacerbated; but this pen just sits on the desk and isn't exposed to temperature changes.

  17. #11
    Senior Member Ron Z's Avatar
    Join Date
    Nov 2019
    Location
    Western Pennsylvania
    Posts
    254
    Thanks
    0
    Thanked 521 Times in 184 Posts
    Rep Power
    2

    Default Re: Modern Kaweco DIA2

    I did some measuring when I got my 076 nib. The shoulders do not hit the inner cap. They clear by a smidge, but it's enough. I know that this is the case of the 076 in a Sport, and I think it was in the DIA.... If you measure inner cap length with an inner cap gauge or two coffee stirrers it looks like the nib would hit the inside end of the cap. But you can verify that it clears if you put a piece of tape on the barrel where the cap stops when tightened down. Then stick a rod to the end of the cap, mark the edge of the cap on the rod, and then place the end of the rod at the edge of the tape. You'll see that there is plenty of room from the end of the nib to the inside end of the cap. It doesn't have to be much - it just has to clear.

    Visit Main Street Pens
    A full service pen shop providing professional, thoughtful pen repair....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •