Results 1 to 4 of 4

Thread: Lever replacement help

  1. #1
    Member
    Join Date
    Aug 2019
    Posts
    41
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Lever replacement help

    Any videos out there? I couldn't find one on youtube except Waterman box levers.

  2. #2
    Senior Member Sagebrush64's Avatar
    Join Date
    May 2015
    Location
    Puget Sound area
    Posts
    355
    Thanks
    47
    Thanked 60 Times in 37 Posts
    Rep Power
    9

    Default Re: Lever replacement help

    Deleted
    Last edited by Sagebrush64; June 27th, 2021 at 05:37 AM.

  3. #3
    Senior Member Sagebrush64's Avatar
    Join Date
    May 2015
    Location
    Puget Sound area
    Posts
    355
    Thanks
    47
    Thanked 60 Times in 37 Posts
    Rep Power
    9

    Default Re: Lever replacement help

    https://www.youtube.com/watch?v=onrqyhuNEMU

    http://www.richardspens.com/ref/repair/leverbox.htm

    or you might pick up a copy of Pen Repair by Jim Marshall and Laurence Oldfield where there is mention of replacing the lever, but you still need to take the box off the pen before you do.

    It's a pretty straight forward procedure as long as you don't break any of the tabs off...then welding is required, or just finding a suitable donor. Good luck

  4. #4
    Senior Member
    Join Date
    Apr 2013
    Location
    SFO USA
    Posts
    1,375
    Thanks
    13
    Thanked 1,113 Times in 573 Posts
    Rep Power
    12

    Default Re: Lever replacement help

    What pen? There are several very different ways levers are held in place.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •