-
June 26th, 2021, 02:52 PM
#1
Member
- Rep Power
- 0
Lever replacement help
Any videos out there? I couldn't find one on youtube except Waterman box levers.
-
-
June 27th, 2021, 05:22 AM
#2
Senior Member
- Rep Power
- 9
Re: Lever replacement help
Last edited by Sagebrush64; June 27th, 2021 at 05:37 AM.
-
-
June 27th, 2021, 05:36 AM
#3
Senior Member
- Rep Power
- 9
Re: Lever replacement help
https://www.youtube.com/watch?v=onrqyhuNEMU
http://www.richardspens.com/ref/repair/leverbox.htm
or you might pick up a copy of Pen Repair by Jim Marshall and Laurence Oldfield where there is mention of replacing the lever, but you still need to take the box off the pen before you do.
It's a pretty straight forward procedure as long as you don't break any of the tabs off...then welding is required, or just finding a suitable donor. Good luck
-
-
June 27th, 2021, 08:29 AM
#4
Senior Member
- Rep Power
- 12
Re: Lever replacement help
What pen? There are several very different ways levers are held in place.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks