2014-02-13 22.06.40.jpg
Tutorial to follow!!
2014-02-13 22.06.40.jpg
Tutorial to follow!!
Crazyorange (February 13th, 2014), earthdawn (February 25th, 2014), Goldfish (February 13th, 2014), inlovewithjournals (February 13th, 2014), kia (February 13th, 2014), KrazyIvan (February 14th, 2014), subramaniyam (February 17th, 2014), trhall (February 13th, 2014)
Step 1
Cut out the back 9.5" x 7.5"
Cut facing piece for the flap as shown in next photo.
Next cut out exactly the same pieces in the contrast fabric which will form the inside.
2014-02-13 22.00.30.jpg
Sorry for the poor focus on that last one!!
Next cut out a piece of the main fabric 5.5" square.
2014-02-13 22.01.32.jpg
This will form the slots for the pens inside.
Next step - Cut soft light-weight interlining for all pieces except the main outside piece.
For the main piece cut a square of soft low loft fusible wadding 5.5" and pieces of standard soft interfacing for the rest of the main part.
2014-02-13 22.47.56.jpg
Iron on all the interfacing.
To be continued........
Very nice. Thanks for posting this, time to visit a fabric store and bring out my sewing machine!
Mortiana27 (February 13th, 2014)
Wadding and interfacing ironed onto the main wrap outer piece.
Last edited by alc3261; February 16th, 2014 at 01:10 PM.
2014-02-16 19.59.38.jpgPhoto for the last post.
2014-02-16 20.00.22.jpgApply interfacing to inside main piece and flap facing. Interfacing 1/4" smaller than fabric all round.
2014-02-16 20.03.14-3.jpgPin together outside main piece and flap facing and the same for the inside main piece.Interfacing to outside panel flap facing and the Pen Slots piece.
2014-02-16 20.00.59.jpgInterfacing to outside panel flap facing and the Pen Slots piece.
The photos are not quite in the right order!!
Last edited by alc3261; February 16th, 2014 at 02:54 PM.
ladynib302 (February 19th, 2014)
This is a neat design, thanks for sharing!
"Nous ecrivons des choses éternelles" ~Antoine de Saint-Exupéry
Sew up the flaps and turn right sides out.
Attach inside to outside piece right sides together, sew all round from top of flaps to lower edge of flaps.
Clip corners. Turn right sides out, pushing out the corners with knitting needle or similar.
2014-02-26 01.24.47.jpg
Main part complete, pin flaps together as shown (corner turned up to show that it is still unattached as yet).
Last edited by alc3261; February 25th, 2014 at 06:40 PM.
Minerva (May 16th, 2014)
Mags or Rob Maguire MB 149, 147, 146,144, Mozart, Boehme, Sailor Realo, Aurora Optima, Churchmen Prescriptor and Parson's Essential, Parker 51 1.3 mm stub, Parker Vacumatic 1939 OB Can, TWSBI's (540,580, Mini and Vac 700), Pelikan M 1000/800 Demonstrator 600/200 demoM/200 OBB, Visconti Rembrandts (2), Lamy, Cross, Watermans, Pilots, Sheaffer's, Omas 360 LE 84/360, GvFC, Esterbrooks J and SJ, Bexley Jitterbug, Taccia, Eversharp 1952 flex, Edison Herald, Franklin Christoph Piper.
Bookmarks