I just finished this earlier today. It's a custom bulb filler FP that was commissioned. I had artistic freedom on this project so I tried to go all out. I chose to go with my Combustion material along with a translucent orange ink chamber and clip inlay.
Dimensions:
Capped: 5 3/8" ~ 137mm
Cap: 2 3/8" ~ 60mm
Body: 3 1/4" ~ 83mm
Body & Nib: 5 1/16" ~ 129mm
Posted: 6 1/8" ~ 156mm
Ink Chamber: 2 1/4" ~ 57mm
Section: 3/4" ~ 19mm
Threads:
Cap/Body: 12x.08mm Triple Start
Body/Section: 9x.75mm
Ink Chamber/Body: 9x.75mm
Nib & Ink:
#6 Two Tone Jowo - F
Bulb Filler - #14 sac
Here's a bit on what I did for the clip inlay:
The final dimension for the inly was just under 3mm in diameter and only 1mm thick!
Thanks for looking!
Bookmarks